Jack’s Magic – Stain Identification Program
Jack’s Magic – Stain Identification Program
Many home owners are unsure of what to do when they notice stains in their swimming pool. Often these ugly marks result in frustration and bitterness towards the swimming pool that you once loved and enjoyed. You may try to remove these stains yourself, but it is highly recommended to reach out to a pool professional before you let too much time pass. Often these situations only worsen if left untreated for too long.
Matt’s Water is highly trained in Stain Identification Technology and we can treat any stain you come across. By contacting Matt’s Water we can quickly diagnose the cause of your stain & begin a treatment plan immediately.
What Causes Staining In Your Pool?
There are very many causes of stains in your swimming pool. Each cause has a root issue that almost always revolves around the chemistry of your swimming pool. We refer to the chemistry of your swimming pool as the Water Balance.
To understand this concept, we need to break your water balance into it’s individual components. Below is a list of each aspect of your water balance along with the recommended levels:
- Free Chlorine: 1 – 3 ppm
- Total Chlorine: 1 – 3 ppm
- pH: 7.4 – 7.6
- Calcium Hardness: 200 – 400 ppm
- Total Alkalinity: 80 – 120 ppm
- Cyanuric Acid: 0 – 30 ppm
- Copper: 0 ppm
- Iron: 0 ppm
Maintaining these chemistry levels is often a challenge for most home owners. It seems easier to understand how your cable bill is calculated than understanding how to keep your water chemistry in balance. Oftentimes because these chemical levels seem daunting, most home owners default to the age old method of taking care of their swimming pools. Looking for clear water, shocking & adding chlorine tablets is general practice for most home owners.
Many Factors Affect Our Pool Chemistry
Unfortunately, this is often not enough maintain to keep your water chemistry properly balanced. Similar to the engine in your vehicle, your pool chemistry needs to be checked regularly (we recommend weekly checks). We emphasize regular testing because your pool water is impacted by many internal and external factors:
- Body sweat
- Sun screen & tanning oils
- Grass, leaves & other vegetation
- Much more…
It’s important to realize that your swimming pool is an open air ecosystem that absorbs many elements & constantly seeks balance. Water by nature requires balance to be satisfied. When our pool water is allowed to spend ample time out of balance it will naturally draw elements from your pool plaster or pull molecules from “out of suspension.” This is not good!
Believe it or not, molecules such as metals are often unseen (or invisible) because your water is balanced and satisfied. However, if too many of a particular product exist in your swimming pool this causes that molecule to become too heavy and “fall out of suspension.” The same can be said for other elements of your swimming pool. Let’s continue diving in and learning more!
How to Identify Stains In Your Pool
Keeping all of this detailed information in mind, how do we recognize when staining is occurring in our swimming pool? Also, if we begin to notice stains, how do we treat them and remove them from our swimming pool?
Well, first thing is first. Since we have already identified that stains are primarily the result of chemical issues from unbalanced water, then we must treat our stains with chemicals to remove them. That being said, we utilize a very unique and handy produced – the Jack’s Magic: The Stain ID Kit.
This kit includes 4 topical tests that we apply individually to each stain. Within 30 seconds, one of these four tests will cause a chemical reaction or “erasing” of the stain. This indicates what compounds are impacting your pool plaster and helps us identify our treatment method.
Developing a Jack’s Magic Treatment Plan
Trust us, stains happen. They happen even to the best swimming pool owners at one time or another. Often they arise without notice and it’s not until they reach a size of 6″ or larger that we often notice them. By that point the damage is already done and it’s time to seek professional treatment to eradicate them.
Upon noticing a stain, we urge you not to panic. Instead contact Matt’s Water so we can identify the type of stain that is occurring and begin an immediate treatment to mitigate the damage.
The Jack’s Magic Treatment Plan is simple but must be followed correctly for the highest level of stain removal. The treatment plan follows this plan but you can find the complete treatment plan by clicking this link:
- Identify – what is the cause of the stains? (use the Stain ID Kit)
- Remove – after locating the cause of the stain apply a Jack’s Magic treatment product for proper stain removal
- Prevent – once your stain is properly treated, we can set your up with a “preventive plan” to keep the culprit minerals out of your water
So What Was The Result of Our Tests?
You may have noticed the images of the Stain Tests throughout this article. By reviewing our first set of images from start to finish, we are following a process of elimination. We also are sure to test multiple stain locations around the swimming pool. This helps to isolate each stain to receive the best test results.
As you can see, we use the following test (4 topical treatments) on different points throughout the swimming pool:
- Test #1: Iron / Copper / Scale
- Test #2: Copper & Scale
- Test #3: O2 Safe Shock Treatment
- Test #4: Iron & Scale
The objective of using different tests is to see which ones consistently and effective remove our “test stains” from this swimming pool. As you can see from our set of images, it appears that Test #1 & #4 were the most effective at stain removal.
At first glance, we assume this is related to by Iron & Scale (exists in both sets of tests). In order to treat this type of staining, we will combine both Jack’s Magic Copper & Scale Stuff as well as their Magic Stain Solution.
If you have any questions about which treatment method your swimming pool might use, just give us a call. We will come out and test your water and help you identify the appropriate treatment option for your swimming pool!
Matt’s Water Brings The Best Treatment Tools
There is a whole lot more that we can cover about Pool Stains & Treatment Options. In fact, this is a very involved subject that requires years of industry knowledge to truly grasp. However, for our purposes, we hope to just highlight the causes of stains (often chemistry issues) & identify a solution (stain identification & targeted treatment).
Matt’s Water has the equipment, team and expertise available to help you treat any pool stain that you are encountering. We also have the capability to service any other aspect of your swimming pool. In fact, we have a fully functional Service Plan, a Brick & Mortal Retail Store or Online E-Commerce store. We provide you with all sorts of options to get the products and services you need to service and maintain your swimming pool.
We service Corsicana, TX as well as all surrounding areas. We invite you to give us a call for a free estimate of our services or visit our store or Online Shop for more information over products and services!